Etoile Exposed Thermostatic System with 4 1/2" Shower Rose and White Porcelain Lever Handles

Style #: ETXS53
Add Resin Soap Dispenser to cart
  1. Sku #:
  1. QTY
    1. REQUEST INFORMATION

  1. View Metal Finish Options

TECHNICAL DOCUMENTS
  1. Specification
  2. Installation Guidelines
  • THE COLLECTION: Etoile VIEW FULL COLLECTION

    Defined elegance. Etoile has a European sophistication with a timeless sense of chic.

  • FEATURES
    • Built in Anti-scald protection.
    • Features a swivel 4 1/2" shower rose.
    • Allows bather to adjust temperature and volume of shower rose.
    • Flow rate regulated at 2.5 gallons per minute (gpm).
  • SPECIFICATION
    1. Care and Cleaning Summary: To clean the finish, wipe gently with a soft damp cloth and then with a soft dry towel. A mild soap solution can be used for daily cleaning.
    2. ADA Compliance: Yes
    3. Code Compliance: Code # ETSV53: Certified with IAPMO & State of MA. Complies with ASME A112.18.1/CSA B125.1, ANSI 117.1 ADA & ASTM E 1621-05.
    4. Suggested Application: Bath
    5. Escutcheon Primary Material: Brass
    6. Assembly / Configuration: Completely Assembled
    7. Anti-scald Protection: Yes
    8. Hot Limit Safety Stop: Yes
    9. Integrated Diverter: Yes
    10. Valve Material: Brass
    11. Diameter of Head: 4.50 INCH
    12. Water Pressure Minimum: 20.00 PSI
    13. Water Pressure Maximum: 85.00 PSI
    14. Water Pressure Recommended: 45.00 PSI
    15. Inlet Connection Size: 0.75 INCH
    16. Pivot: Yes
    17. Number of Handles: Two
    18. Installation Requirements or Notes: Riser may not be field cut to adjust height - custom heights must be special ordered. Center spread dimensions are non-adjustable, rough-in accuracy is crucial. It is recommended to install stop valves on the hot and cold supply lines for servicing
    19. Concealed / Exposed: Exposed
    20. Inlet Connection Type: Female NPT
    21. Handle Turn Angle: Quarter Turn
    1. Care and Cleaning Summary: To clean the finish, wipe gently with a soft damp cloth and then with a soft dry towel. A mild soap solution can be used for daily cleaning.
    2. ADA Compliance: Yes
    3. Code Compliance: Code # ETSV53: Certified with IAPMO & State of MA. Complies with ASME A112.18.1/CSA B125.1, ANSI 117.1 ADA & ASTM E 1621-05.
    4. Suggested Application: Bath
    5. Escutcheon Primary Material: Brass
    6. Assembly / Configuration: Completely Assembled
    7. Anti-scald Protection: Yes
    8. Hot Limit Safety Stop: Yes
    9. Integrated Diverter: Yes
    10. Valve Material: Brass
    11. Diameter of Head: 4.50 INCH
    12. Water Pressure Minimum: 20.00 PSI
    13. Water Pressure Maximum: 85.00 PSI
    14. Water Pressure Recommended: 45.00 PSI
    15. Inlet Connection Size: 0.75 INCH
    16. Pivot: Yes
    17. Number of Handles: Two
    18. Installation Requirements or Notes: Riser may not be field cut to adjust height - custom heights must be special ordered. Center spread dimensions are non-adjustable, rough-in accuracy is crucial. It is recommended to install stop valves on the hot and cold supply lines for servicing
    19. Concealed / Exposed: Exposed
    20. Inlet Connection Type: Female NPT
    21. Handle Turn Angle: Quarter Turn
    1. Care and Cleaning Summary: To clean the finish, wipe gently with a soft damp cloth and then with a soft dry towel. A mild soap solution can be used for daily cleaning.
    2. ADA Compliance: Yes
    3. Code Compliance: Code # ETSV53: Certified with IAPMO & State of MA. Complies with ASME A112.18.1/CSA B125.1, ANSI 117.1 ADA & ASTM E 1621-05.
    4. Suggested Application: Bath
    5. Escutcheon Primary Material: Brass
    6. Assembly / Configuration: Completely Assembled
    7. Anti-scald Protection: Yes
    8. Hot Limit Safety Stop: Yes
    9. Integrated Diverter: Yes
    10. Valve Material: Brass
    11. Diameter of Head: 4.50 INCH
    12. Water Pressure Minimum: 20.00 PSI
    13. Water Pressure Maximum: 85.00 PSI
    14. Water Pressure Recommended: 45.00 PSI
    15. Inlet Connection Size: 0.75 INCH
    16. Pivot: Yes
    17. Number of Handles: Two
    18. Installation Requirements or Notes: Riser may not be field cut to adjust height - custom heights must be special ordered. Center spread dimensions are non-adjustable, rough-in accuracy is crucial. It is recommended to install stop valves on the hot and cold supply lines for servicing
    19. Concealed / Exposed: Exposed
    20. Inlet Connection Type: Female NPT
    21. Handle Turn Angle: Quarter Turn
    1. Care and Cleaning Summary: To clean the finish, wipe gently with a soft damp cloth and then with a soft dry towel. A mild soap solution can be used for daily cleaning.
    2. ADA Compliance: Yes
    3. Code Compliance: Code # ETSV53: Certified with IAPMO & State of MA. Complies with ASME A112.18.1/CSA B125.1, ANSI 117.1 ADA & ASTM E 1621-05.
    4. Suggested Application: Bath
    5. Escutcheon Primary Material: Brass
    6. Assembly / Configuration: Completely Assembled
    7. Anti-scald Protection: Yes
    8. Hot Limit Safety Stop: Yes
    9. Integrated Diverter: Yes
    10. Valve Material: Brass
    11. Diameter of Head: 4.50 INCH
    12. Water Pressure Minimum: 20.00 PSI
    13. Water Pressure Maximum: 85.00 PSI
    14. Water Pressure Recommended: 45.00 PSI
    15. Inlet Connection Size: 0.75 INCH
    16. Pivot: Yes
    17. Number of Handles: Two
    18. Installation Requirements or Notes: Riser may not be field cut to adjust height - custom heights must be special ordered. Center spread dimensions are non-adjustable, rough-in accuracy is crucial. It is recommended to install stop valves on the hot and cold supply lines for servicing
    19. Concealed / Exposed: Exposed
    20. Inlet Connection Type: Female NPT
    21. Handle Turn Angle: Quarter Turn
    1. Care and Cleaning Summary: To clean the finish, wipe gently with a soft damp cloth and then with a soft dry towel. A mild soap solution can be used for daily cleaning.
    2. ADA Compliance: Yes
    3. Code Compliance: Code # ETSV53: Certified with IAPMO & State of MA. Complies with ASME A112.18.1/CSA B125.1, ANSI 117.1 ADA & ASTM E 1621-05.
    4. Suggested Application: Bath
    5. Escutcheon Primary Material: Brass
    6. Assembly / Configuration: Completely Assembled
    7. Anti-scald Protection: Yes
    8. Hot Limit Safety Stop: Yes
    9. Integrated Diverter: Yes
    10. Valve Material: Brass
    11. Diameter of Head: 4.50 INCH
    12. Water Pressure Minimum: 20.00 PSI
    13. Water Pressure Maximum: 85.00 PSI
    14. Water Pressure Recommended: 45.00 PSI
    15. Inlet Connection Size: 0.75 INCH
    16. Pivot: Yes
    17. Number of Handles: Two
    18. Installation Requirements or Notes: Riser may not be field cut to adjust height - custom heights must be special ordered. Center spread dimensions are non-adjustable, rough-in accuracy is crucial. It is recommended to install stop valves on the hot and cold supply lines for servicing
    19. Concealed / Exposed: Exposed
    20. Inlet Connection Type: Female NPT
    21. Handle Turn Angle: Quarter Turn
    1. Care and Cleaning Summary: To clean the finish, wipe gently with a soft damp cloth and then with a soft dry towel. A mild soap solution can be used for daily cleaning.
    2. ADA Compliance: Yes
    3. Code Compliance: Code # ETSV53: Certified with IAPMO & State of MA. Complies with ASME A112.18.1/CSA B125.1, ANSI 117.1 ADA & ASTM E 1621-05.
    4. Suggested Application: Bath
    5. Escutcheon Primary Material: Brass
    6. Assembly / Configuration: Completely Assembled
    7. Anti-scald Protection: Yes
    8. Hot Limit Safety Stop: Yes
    9. Integrated Diverter: Yes
    10. Valve Material: Brass
    11. Diameter of Head: 4.50 INCH
    12. Water Pressure Minimum: 20.00 PSI
    13. Water Pressure Maximum: 85.00 PSI
    14. Water Pressure Recommended: 45.00 PSI
    15. Inlet Connection Size: 0.75 INCH
    16. Pivot: Yes
    17. Number of Handles: Two
    18. Installation Requirements or Notes: Riser may not be field cut to adjust height - custom heights must be special ordered. Center spread dimensions are non-adjustable, rough-in accuracy is crucial. It is recommended to install stop valves on the hot and cold supply lines for servicing
    19. Concealed / Exposed: Exposed
    20. Inlet Connection Type: Female NPT
    21. Handle Turn Angle: Quarter Turn
    1. Care and Cleaning Summary: To clean the finish, wipe gently with a soft damp cloth and then with a soft dry towel. A mild soap solution can be used for daily cleaning.
    2. ADA Compliance: Yes
    3. Code Compliance: Code # ETSV53: Certified with IAPMO & State of MA. Complies with ASME A112.18.1/CSA B125.1, ANSI 117.1 ADA & ASTM E 1621-05.
    4. Suggested Application: Bath
    5. Escutcheon Primary Material: Brass
    6. Assembly / Configuration: Completely Assembled
    7. Anti-scald Protection: Yes
    8. Hot Limit Safety Stop: Yes
    9. Integrated Diverter: Yes
    10. Valve Material: Brass
    11. Diameter of Head: 4.50 INCH
    12. Water Pressure Minimum: 20.00 PSI
    13. Water Pressure Maximum: 85.00 PSI
    14. Water Pressure Recommended: 45.00 PSI
    15. Inlet Connection Size: 0.75 INCH
    16. Pivot: Yes
    17. Number of Handles: Two
    18. Installation Requirements or Notes: Riser may not be field cut to adjust height - custom heights must be special ordered. Center spread dimensions are non-adjustable, rough-in accuracy is crucial. It is recommended to install stop valves on the hot and cold supply lines for servicing
    19. Concealed / Exposed: Exposed
    20. Inlet Connection Type: Female NPT
    21. Handle Turn Angle: Quarter Turn
    1. Care and Cleaning Summary: To clean the finish, wipe gently with a soft damp cloth and then with a soft dry towel. A mild soap solution can be used for daily cleaning.
    2. ADA Compliance: Yes
    3. Code Compliance: Code # ETSV53: Certified with IAPMO & State of MA. Complies with ASME A112.18.1/CSA B125.1, ANSI 117.1 ADA & ASTM E 1621-05.
    4. Suggested Application: Bath
    5. Escutcheon Primary Material: Brass
    6. Assembly / Configuration: Completely Assembled
    7. Anti-scald Protection: Yes
    8. Hot Limit Safety Stop: Yes
    9. Integrated Diverter: Yes
    10. Valve Material: Brass
    11. Diameter of Head: 4.50 INCH
    12. Water Pressure Minimum: 20.00 PSI
    13. Water Pressure Maximum: 85.00 PSI
    14. Water Pressure Recommended: 45.00 PSI
    15. Inlet Connection Size: 0.75 INCH
    16. Pivot: Yes
    17. Number of Handles: Two
    18. Installation Requirements or Notes: Riser may not be field cut to adjust height - custom heights must be special ordered. Center spread dimensions are non-adjustable, rough-in accuracy is crucial. It is recommended to install stop valves on the hot and cold supply lines for servicing
    19. Concealed / Exposed: Exposed
    20. Inlet Connection Type: Female NPT
    21. Handle Turn Angle: Quarter Turn
    1. Care and Cleaning Summary: To clean the finish, wipe gently with a soft damp cloth and then with a soft dry towel. A mild soap solution can be used for daily cleaning.
    2. ADA Compliance: Yes
    3. Code Compliance: Code # ETSV53: Certified with IAPMO & State of MA. Complies with ASME A112.18.1/CSA B125.1, ANSI 117.1 ADA & ASTM E 1621-05.
    4. Suggested Application: Bath
    5. Escutcheon Primary Material: Brass
    6. Assembly / Configuration: Completely Assembled
    7. Anti-scald Protection: Yes
    8. Hot Limit Safety Stop: Yes
    9. Integrated Diverter: Yes
    10. Valve Material: Brass
    11. Diameter of Head: 4.50 INCH
    12. Water Pressure Minimum: 20.00 PSI
    13. Water Pressure Maximum: 85.00 PSI
    14. Water Pressure Recommended: 45.00 PSI
    15. Inlet Connection Size: 0.75 INCH
    16. Pivot: Yes
    17. Number of Handles: Two
    18. Installation Requirements or Notes: Riser may not be field cut to adjust height - custom heights must be special ordered. Center spread dimensions are non-adjustable, rough-in accuracy is crucial. It is recommended to install stop valves on the hot and cold supply lines for servicing
    19. Concealed / Exposed: Exposed
    20. Inlet Connection Type: Female NPT
    21. Handle Turn Angle: Quarter Turn
    1. Care and Cleaning Summary: To clean the finish, wipe gently with a soft damp cloth and then with a soft dry towel. A mild soap solution can be used for daily cleaning.
    2. ADA Compliance: Yes
    3. Code Compliance: Code # ETSV53: Certified with IAPMO & State of MA. Complies with ASME A112.18.1/CSA B125.1, ANSI 117.1 ADA & ASTM E 1621-05.
    4. Suggested Application: Bath
    5. Escutcheon Primary Material: Brass
    6. Assembly / Configuration: Completely Assembled
    7. Anti-scald Protection: Yes
    8. Hot Limit Safety Stop: Yes
    9. Integrated Diverter: Yes
    10. Valve Material: Brass
    11. Diameter of Head: 4.50 INCH
    12. Water Pressure Minimum: 20.00 PSI
    13. Water Pressure Maximum: 85.00 PSI
    14. Water Pressure Recommended: 45.00 PSI
    15. Inlet Connection Size: 0.75 INCH
    16. Pivot: Yes
    17. Number of Handles: Two
    18. Installation Requirements or Notes: Riser may not be field cut to adjust height - custom heights must be special ordered. Center spread dimensions are non-adjustable, rough-in accuracy is crucial. It is recommended to install stop valves on the hot and cold supply lines for servicing
    19. Concealed / Exposed: Exposed
    20. Inlet Connection Type: Female NPT
    21. Handle Turn Angle: Quarter Turn
    1. Care and Cleaning Summary: To clean the finish, wipe gently with a soft damp cloth and then with a soft dry towel. A mild soap solution can be used for daily cleaning.
    2. ADA Compliance: Yes
    3. Code Compliance: Code # ETSV53: Certified with IAPMO & State of MA. Complies with ASME A112.18.1/CSA B125.1, ANSI 117.1 ADA & ASTM E 1621-05.
    4. Suggested Application: Bath
    5. Escutcheon Primary Material: Brass
    6. Assembly / Configuration: Completely Assembled
    7. Anti-scald Protection: Yes
    8. Hot Limit Safety Stop: Yes
    9. Integrated Diverter: Yes
    10. Valve Material: Brass
    11. Diameter of Head: 4.50 INCH
    12. Water Pressure Minimum: 20.00 PSI
    13. Water Pressure Maximum: 85.00 PSI
    14. Water Pressure Recommended: 45.00 PSI
    15. Inlet Connection Size: 0.75 INCH
    16. Pivot: Yes
    17. Number of Handles: Two
    18. Installation Requirements or Notes: Riser may not be field cut to adjust height - custom heights must be special ordered. Center spread dimensions are non-adjustable, rough-in accuracy is crucial. It is recommended to install stop valves on the hot and cold supply lines for servicing
    19. Concealed / Exposed: Exposed
    20. Inlet Connection Type: Female NPT
    21. Handle Turn Angle: Quarter Turn
View all Exposed Thermostatic
View all Etoile products

You have successfully added the to your cart!